Graphic vandalism: Multi-analytical evaluation of laser and chemical methods for the removal of spray paints

Anno: 2020

Autori: Giusti C., Colombini MP., Lluveras-Tenorio A., La Nasa J., Striova J., Salvadori B.

Affiliazione autori: Univ Pisa, Dept Chem & Ind Chem, Via Moruzzi 3, I-56127 Pisa, Italy; CNR INO, Natl Inst Opt, Largo Fermi 6, I-50125 Florence, Italy;‎ CNR ISPC, Inst Heritage Sci, Via Madonna Piano 10, I-50134 Sesto Fiorentino, FI, Italy

Abstract: In this work, we propose the laser-based cleaning with a Q-switched Nd:YAG laser (lambda = 532 nm) not as a standalone methodology but rather in combination with chemical agents for the efficient removal vandal signs made with spray paints from marble substrates. The advantage of such approach is based on the preliminary removal of the superficial paint by pulsed laser radiation so as to minimize the risk of the further colorant diffusion in the stone, caused by the solvent-based cleaning that is performed in the second step. The outcome was demonstrated on the removal of five aerosol paints (red, blue, black, green and yellow by Montana Colors 94), whose typology was chosen in agreement with the widespread use of this brand. The influence of substrate characteristics on the cleaning performance, such as roughness, porosity, and ageing of the paint, was investigated on fresh and aged paints on sound marble as well as on fresh paints on aged marble. Fresh and aged paints were characterized in terms of mineralogy and chemistry using X-ray diffraction (XRD), X-ray fluorescence (XRF), Pyrolysis-Gas Chromatography/Mass Spectrometry (Py-GC/MS), Gas/Chromatography/Mass spectrometry (GC/MS). The efficiency for single cleaning step and when applied in sequence was evaluated by colorimetric measurements, optical microscopy on surface and in cross section, XRF and reflection Fourier Transform Infrared spectroscopy (FTIR). Invasiveness of laser cleaning on sound marble was evaluated by Laser Scanner microprofilometry. The results converge in indicating the combined approach as a promising method where the preliminary thinning of the paint layer with laser ablation and the subsequent solvent action proved more efficient than the standalone approaches. The dependence of cleaning efficiency on the paint composition and ageing, as well as on the porosity of the stone, is also discussed. (C) 2020 Elsevier Masson SAS. All rights reserved.

Giornale/Rivista: JOURNAL OF CULTURAL HERITAGE

Volume: 44      Da Pagina: 260  A: 274

Parole chiavi: Graffiti, marble; Alkyd paint; Laser cleaning; Solvent cleaning; Combined approach; Cleaning efficacy and harmfulness
DOI: 10.1016/j.culher.2020.01.007

Citazioni: 12
dati da “WEB OF SCIENCE” (of Thomson Reuters) aggiornati al: 2024-03-24
Riferimenti tratti da Isi Web of Knowledge: (solo abbonati)
Link per visualizzare la scheda su IsiWeb: Clicca qui
Link per visualizzare la citazioni su IsiWeb: Clicca qui